C.Itoh EZ-1305 Manual de usuario descargar pdf (Pagina 21)

4. Accessory

4-1. RS-232 Module Installation

1 Module Connection Wire

2 RS-232 module

3 Secure Screw

4 RS-232 Back Panel

μ

Note

ν

Please make sure that anti-static precautions

are adopted during the installation.

1. Make sure the power is off and the

power cable is unplugged. Place the

printer onto a smooth surface and flip the

whole printer unit upside down.

2. Unscrew bottom case screws as

indicated in figure.

3. Push the places as the arrow pointed in

figure with both hands. Then move the

Bottom Cover upward and remove it.

4. Push the Mainboard Hooks to release

the mainboard and then turn over it to

opposite side.

5. Unscrew the Ground Wire Screw and

Mainboard Screw to remove the

Connection Port Panel.

6. Align the RS-232 Back Panel to

connection ports and fix it with Ground

Wire Screw and Mainboard Screw.

7. Plug one end of the Module Connection

Wire on into the socket on RS-232

module.

EZ-1105 / EZ-1305 User’s Manual

20

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios